Agilent Technologies InfiniiVision 6000 Series Wartungshandbuch PDF herunterladen (Seite 513)

100

101

Commands by Subsystem 5

Agilent InfiniiVision 6000 Series Oscilloscopes Programmer's Guide 513

:TRIGger[:EDGE]:LEVel

(see page 798)

Command Syntax

:TRIGger[:EDGE]:LEVel <level>

<level> ::= <level>[,<source>]

<level> ::= 0.75 x full-scale voltage from center screen in NR3 format

for internal triggers

<level> ::= ±(external range setting) in NR3 format

for external triggers

<level> ::= ±8 V for digital channels (MSO models)

<source> ::= {CHANnel<n> | EXTernal} for the DSO models

<source> ::= {CHANnel<n> | DIGital0,..,DIGital15 | EXTernal}

for the MSO models

<n>::={1|2|3|4}forthefour channel oscilloscope models

<n> ::= {1 | 2} for the two channel oscilloscope models

The :TRIGger[:EDGE]:LEVel command sets the trigger level voltage for the

active trigger source.

Query Syntax

:TRIGger[:EDGE]:LEVel? [<source>]

The :TRIGger[:EDGE]:LEVel? query returns the trigger level of the current

trigger source.

Return Format

See Also • "Introduction to :TRIGger Commands" on page 479

• ":TRIGger[:EDGE]:SOURce" on page 516

• ":EXTernal:RANGe" on page 274

• ":POD<n>:THReshold" on page 407

• ":DIGital<n>:THReshold" on page 255

NOTE

If the optional source is specified and is not the active source, the level on the active source

is not affected and the active source is not changed.

1 2 ... 508 509 510 511 512 513 514 515 516 517 518 ... 933 934

Kommentare zu diesen Handbüchern

Keine Kommentare

Agilent Technologies InfiniiVision 6000 Series Wartungshandbuch Seite 513

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multimeter Agilent Technologies InfiniiVision 6000 Series