Agilent Technologies 1100 Series Bedienungsanleitung PDF herunterladen (Seite 46)

Setting up an Analysis

Preparing the HPLC System

6 Purge the pump. For more information see “Priming and Purging the System”

on page 41.

7 Allow the detector at least 15 minutes to provide a stable baseline.

8 For the isocratic pump, fill the solvent bottle with the mixture of HPLC-grade

bidistilled water (30 %) and acetonitrile (70 %).

9 Click on the Load Method button and select

'()B/&0and press OK. The

default LC method parameters are transferred into the 1100 modules.

Figure 24 Loading Default LC Method

refer to step 10 “Setting

Parameters” on page 47

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 75 76

Keine Kommentare

Agilent Technologies 1100 Series Bedienungsanleitung Seite 46