Agilent Technologies 1100 Series Bedienungsanleitung PDF herunterladen (Seite 35)

Installing your System

Configuring the Analytical System

This chapter describes how to configure the communication of your Value

Solution ChemStation software with your LC instruments using a LAN

connection with the ChemStation Configuration Editor. For details refer to

the Installing your ChemStation manual supplied with your system.

The following example describes how to configure an 1100 Series system

with modules interconnected by the 1100 Series controller area network

(CAN) that will automatically configure each module.

NOTE Microsoft TCP/IP protocol must be installed and configured on the Value

Solution ChemStation PC. In addition a Bootp Server must be running, which

was configured for the instruments to be used.

1 Open the ChemStation start-up group or select Start -> Programs ->

ChemStation.

Figure 17 ChemStation Program Folder

see step 5

“Starting an

Online Session”

on page 37

see step 3

“Adding the

licence

number” on

page 36

see step 2 “Configuration

Editor” on page 36

see step 5 “Installation Qualification”

on page 36

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 75 76

Keine Kommentare

Agilent Technologies 1100 Series Bedienungsanleitung Seite 35