Agilent Technologies 1100 Series Bedienungsanleitung PDF herunterladen (Seite 30)

Installing your System

Installing the ChemStation Hardware

1 Place the Value Solution ChemStation PC next to 1100 system. Allow enough

space between the 1100 modules and the PC for maintenance.

2 Place the Monitor on top of the PC.

3 Place a printer where needed.

4 Connect the LAN cross-over cable from the detector’s JetDirect card (see

“Installing the JetDirect card into the VW detector” on page 19) and the PC’s

LAN connector.

5 Connect the monitor cable between monitor and PC.

6 Connect mouse and keyboard to the PC.

7 Connect the printer cable between PC and printer (if available).

8 Connect power cords to the PC, monitor and printer (if available).

Figure 12 Installing the ChemStation PC (rear view)

AC power

LAN cable to

JetDirect card

Monitor

Mouse

Keyboard

Monitor cable

AC power

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 75 76

Keine Kommentare

Agilent Technologies 1100 Series Bedienungsanleitung Seite 30