Agilent Technologies 1100 Series Bedienungsanleitung PDF herunterladen (Seite 11)

General information about your system

System Restrictions

The system mentioned on page 10 has some restrictions compared to the

standard 1100 system. These restrictions are listed in the table below:

NOTE The G1321A fluorescence detector cannot be operated in spectra mode. This

requires the spectra software module which is not support with the G2220AA

2D-Value Solution ChemStation. Wavelength verifications on the module

require a Control Module G1323A or G1323A.

Table 1 System Restrictions

Module Restrictions

ChemStation • single G2220AA 2D-Value Solution ChemStation only (one online

and one offline session)

- not upgradeable to G2170AA 2D-ChemStation

• supports the following 1100 series HPLC modules as shown in

“System Configuration” on page 10:

G1310A isocratic pump

G1314A variable wavelength detector

G1328A manual injector

G1316A thermostatted column compartment (may be added)

G1321A fluorescence detector (may be added), see note below.

G1362A refractive index detector (may be added)

• control via LAN (no HPIB or RS-232)

• No support of ChemStation add-on like

Spectra Module, ChemAccess, ChemStore, GPC and CCMode

All 1100 modules • operable by Control Module G1323B (may be added), see note

below.

• firmware upgrade via control module G1323B and/or LAN (Value

Solution ChemStation/portable PC).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 75 76

Keine Kommentare

Agilent Technologies 1100 Series Bedienungsanleitung Seite 11