Agilent Technologies 1100 Series Bedienungsanleitung PDF herunterladen (Seite 34)

Installing your System

Installing the LAN Communication

Figure 15 Bootp Manager

8 Press Apply to activate the changes. The Bootp Manager now shows the

entries made above.

9 Press OK to exit the Bootp Manager and power cycle the VW detector, to force

it to send a new bootp request again. This time, the MAC address will be

recognized by the Bootp Server (Figure 16). It will send the configured IP

address and subnet mask information which are necessary for

communication to the JetDirect card.

Figure 16 Bootp Server - 1100 module found

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 75 76

Keine Kommentare

Agilent Technologies 1100 Series Bedienungsanleitung Seite 34