Agilent Technologies 1100 Series Bedienungsanleitung PDF herunterladen (Seite 37)

Installing your System

Configuring the Analytical System

5 When you start the Instrument 1 Online Value Solution ChemStation for the

first time (refer to Figure 17 on page 35), the “Configure 1100 System Access”

dialog box displays the 1100 modules detected during instrument initialization

(see Figure 20). 1100 modules that have been recognized are listed as “online”

(indicated by a green icon) along with their serial numbers. 1100 modules that

have not been detected are marked “offline”. You can selectively take certain

modules out of the software configuration, e.g. if your 1100 system includes

two 1100 detectors and your next analysis only requires one of them.

NOTE The section “System Restrictions” on page 11 describes the limitations on

usable 1100 series modules.

The unneeded 1100 module may then remain turned off but still be

connected. After modifying the configuration, you must restart the Value

Solution ChemStation. The “Configure 1100 System Access” dialog is

available from the Instrument menu in the “Method and Run-Control” view,

when view Full Menu is displayed.

Figure 20 The Configure 1100 System Access dialog allows to selectively include detected

1100 modules into the configuration.

6 Press OK and the software continues the loading process.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 75 76

Keine Kommentare

Agilent Technologies 1100 Series Bedienungsanleitung Seite 37