Agilent Technologies 1100 Series Installationsanleitung PDF herunterladen (Seite 78)

1100 LC Modules Control Manual - 78 - 03-914947-30:Rev.6

Define the center wavelength in the Wl field and the bandwidth in

the Bw field. The signal values contained within the bandwidth

are bunched and give one value for the center wavelength.

NOTE: For more details about the reference wavelength settings, refer to your Agilent

Technologies 1100 Diode Array Detector technical documentation.

Signal Program Parameter Group

Program changes the wavelength and/or the bandwidth for each

signal and/or its reference during runs.

Use the following buttons to edit the table:

to add a line to the table.

to delete a line in the table.

to clear the entire table.

Others Parameter Group

Check Automatic Lamp Stop to stop automatically the detector

lamp at the end of the run.

Select the Peakwidth value in the scrolling list. This parameter

influences the peak detection. A response time and a data rate

are associated with each peakwidth value. The available values

are:

<0.01 min (Response Time <0.1 sec) (DataRate=20 Hz)

>0.01 min (Response Time =0.2 sec) (DataRate=20 Hz)

>0.02 min (Response Time =0.5 sec) (DataRate=10 Hz)

>0.05 min (Response Time =1 sec) (DataRate=5 Hz)

>0.1 min (Response Time =2 sec) (DataRate=2.5 Hz)

>0.2 min (Response Time =4 sec) (DataRate=1.25 Hz)

>0.4 min (Response Time =8 sec) (DataRate=0.62 Hz)

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 183 184

Keine Kommentare

Agilent Technologies 1100 Series Installationsanleitung Seite 78