Agilent Technologies DisplayPort Bedienungsanleitung PDF herunterladen (Seite 10)

Agilent Technologies, Inc.

DisplayPort Test Implementation Group 10 Agilent J-BERT N4903B & 90000A/X/Q Series Sink Draft2

100MHz

168mUI

100mUI

Calibrated Eye Height

with Crosstalk

46mV

diff

+/-10%

150mV

diff

+/-10%

90mV

diff

+/-10%

SSC

33 KHz, triangular shaped, 5000 ppm down spread

Pre-Emphasis

Crosstalk Pattern

D24.3 (quarter rate

Clock)

405MHz Clock

D24.3 (quarter rate

Clock)

675MHz Clock

D24.3 (quarter rate

Clock)

1.35GHz Clock

Crosstalk Amplitude

134mV

diff

applied at

TP3

450mV

diff

applied at

TP3

Adjusted for proper

EYE Height at TP3_EQ

FAUX Crosstalk (if

DUT supports FAUX)

Yes

Test Time

Refer to Table 4-1 of the CTS

Figure 1: Table of Stressed Eye Test Conditions

9 Sink Test Calibration Procedure

The following Figure shows the conceptual setup as described in Figure 4-3 of the PHYCTS 1.2b.

Figure 2: PHY CTS 1.2b HBR/HBR2 Conceptual Setup (Figure 4-3 in PHY CTS 1.2b)

The following procedure describes step-by-step how to calibrate the stressed impairments per the PHY

CTS 1.2b. Follow the steps appropriate for HBR2, HBR, and RBR. The detailed example shown is for

HBR2 as specified in Table 4-4 of the PHYCTS 1.2b. Since the lanes on test fixture vary in ISI and cross

talk behavior the calibration steps for ISI, SJ

sweep

and eye opening without and with cross talk have to be

done per lane.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Agilent Technologies DisplayPort Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Agilent Technologies DisplayPort