Agilent Technologies 1100 Series Betriebsanweisung PDF herunterladen (Seite 23)

Agilent 1100 Series Valves 17

Operation 2

Handheld Controller functions

Setting the EMF limit and switch counter

1 From the startup screen of the Agilent 1100 Series Handheld Control

Module select System (F5)

2 Select Records (F4) and scroll through the displayed module list and select

the Agilent 1100 Series Valve.

3 Press EMF (F1) and then select 1 Setup Limits.

4 In the upcoming dialog (Figure 9) edit the EMF limit. If this limiting number

of switches has been reached, you will get an Early Maintenance

Feedback signal on your Handheld controller and in the Graphical User

Interface of the Agilent ChemStation Software. After you have done an

maintenance action, press Reset (F7) to reset the switch counter. Also refer

to the section “Early Maintenance Feedback (EMF)" on page 27.

Figure 8 Valve Synchronization

Figure 9 Early Maintenance Feedback (EMF) Screen

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 77 78

Keine Kommentare

Agilent Technologies 1100 Series Betriebsanweisung Seite 23