Agilent Technologies 1100 Series Betriebsanweisung PDF herunterladen (Seite 14)

8 Agilent 1100 Series Valves

1 Installation and Configuration

Software Configuration

The 1100 Series Valves can be controlled by the Agilent ChemStation Rev.

A.09.03 or higher.

CAUTION

The maximum number of all modules (including CAN-slave valves) in your Agilent 1100

Series LC system must not exceed 13.

Contact your local sales and service representative to verify, if your configuration is

supported. This is especially important, if the number of module is close to 13.

To configure the 1100 Series Valves

Step Note

1 Start the Agilent ChemStation

Software.

2 Select Configure 1100 Access in the

Instrument menu.

3 In the upcoming Configuration dialog

box select one or multiple valves and

click Add.

The selected green valve icon now

moves from the left Available Modules

panel to the right Configured Modules

panel as displayed in Figure 3 on page 9.

4 Click OK to leave the Configuration

dialog box.

5 After a Restart the Agilent

ChemStation Software a new menu

item Setup Valve now appears in the

Instrument menu.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 77 78

Keine Kommentare

Agilent Technologies 1100 Series Betriebsanweisung Seite 14