Agilent Technologies 6002A Betriebsanweisung PDF herunterladen (Seite 296)

E Cleaning Information Additional Cleaning Information

296 E6000C Mini-OTDR User’s Guide, E0302

Use this procedure particularly when there is greasy dirt

on the device:

1 Put the optical device into a bath of isopropyl alcohol,

and wait at least 10 minutes.

2 Remove the fluid using compressed air at some

distance and with low pressure. If there are any streaks

or drying stains on the surface, repeat the whole

cleaning procedure.

Additional Cleaning Information

The following cleaning procedures may be used with

other optical equipment:

• How to clean bare fiber ends

• How to clean large area lenses and mirrors

How to clean bare fiber ends

Bare fiber ends are often used for splices or, together with

other optical components, to create a parallel beam. The

end of a fiber can often be scratched. You make a new

cleave. To do this:

1 Strip off the cladding.

2 Take a new soft-tissue and moisten it with isopropyl

alcohol.

3 Carefully clean the bare fiber with this tissue.

4 Make your cleave and immediately insert the fiber into

your bare fiber adapter in order to protect the surface

from dirt.

1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 319 320

Keine Kommentare

Agilent Technologies 6002A Betriebsanweisung Seite 296