Agilent Technologies 6002A Betriebsanweisung PDF herunterladen (Seite 287)

How to clean connector interfaces E Cleaning Information

E6000C Mini-OTDR User’s Guide, E0302

287

How to clean connector

interfaces

CAUTION Be careful when using pipe-cleaners, as the core and the

bristles of the pipe-cleaner are hard and can damage the

interface.

Do not use pipe-cleaners on optical head adapters, as the

hard core of normal pipe cleaners can damage the bottom

of an adapter.

Preferred Procedure

Use the following procedure on most occasions.

1 Clean the interface by pushing and pulling a new, dry

pipe-cleaner into the opening. Rotate the pipe-cleaner

slowly as you do this.

2 Then clean the interface by rubbing a new, dry cotton-

swab over the surface using a small circular movement.

3 Blow away any remaining lint with compressed air.

Procedure for Stubborn Dirt

Use this procedure particularly when there is greasy dirt

on the interface:

1 Moisten a new pipe-cleaner with isopropyl alcohol.

2 Clean the interface by pushing and pulling the pipe-

cleaner into the opening. Rotate the pipe-cleaner

slowly as you do this.

3 Moisten a new cotton-swab with isopropyl alcohol.

4 Clean the interface by rubbing the cotton-swab over the

surface using a small circular movement.

1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 319 320

Keine Kommentare

Agilent Technologies 6002A Betriebsanweisung Seite 287