Agilent Technologies 6002A Betriebsanweisung PDF herunterladen (Seite 294)

E Cleaning Information How to clean optical devices sensitive to mechanical stress

294 E6000C Mini-OTDR User’s Guide, E0302

2 Clean the interface by rubbing the cotton-swab over the

surface using a small circular movement.

3 Take a new, dry soft-tissue and remove the alcohol,

dissolved sediment and dust, by rubbing gently over the

surface using a small circular movement.

4 Blow away any remaining lint with compressed air.

How to clean optical devices

sensitive to mechanical stress

Some optical devices, such as the Agilent 81000BR

Reference Reflector, which has a gold plated surface, are

very sensitive to mechanical stress or pressure. Do not

use cotton-swabs, soft-tissues or other mechanical

cleaning tools, as these can scratch or destroy the surface.

Preferred Procedure

Use the following procedure on most occasions.

1 Blow away any dust or dirt with compressed air.

Procedure for Stubborn Dirt

To clean devices that are extremely sensitive to

mechanical stress or pressure you can also use an optical

clean polymer film. This procedure is time-consuming,

but you avoid scratching or destroying the surface.

1 Put the film on the surface and wait at least 30 minutes

to make sure that the film has had enough time to dry.

2 Remove the film and any dirt with special adhesive

tapes.

1 2 ... 289 290 291 292 293 294 295 296 297 298 299 ... 319 320

Keine Kommentare

Agilent Technologies 6002A Betriebsanweisung Seite 294