Agilent Technologies 53230A Spezifikationen PDF herunterladen (Seite 210)

Chapter 4 Retrofitting Options

To Retrofit the 53210A Channel 2 Front Panel Input (Option 106 or

Option 115, plus Front Panel Option 202)

210 Assembly-Level Service Guide

5 Turn the counter chassis upright and position the counter as

shown in Figure 4-10.

6 Remove the T20 TORX screw on the front left-hand side of the

motherboard as shown in Figure 4-10.

NOTE The four standoffs on the aluminum side panels (two on each side,

front) secure the front panel into the four holes cut out on the

plastic sides of the front panel (two on each side). The next steps

free the standoffs from the holes so the front panel can be

removed.

Figure 4-10. T20 TORX Screw on Motherboard

7 With your right hand, press in on the plastic tab (X on Figure 4-10)

at the top left front of the front panel, while at the same time, use

your left hand to press in on the front of the left-hand aluminum

chassis side-panel, so that the front of the side-panel overlaps the

T20

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 259 260

Keine Kommentare

Agilent Technologies 53230A Spezifikationen Seite 210