Agilent Technologies J3916A Bedienungsanleitung PDF herunterladen (Seite 81)

Installation

Connecting the Probe

Install the Management Station Modem

You need the following list of equipment to install the management station’s

modem:

Hayes-compatible 300 to 38.4 K baud modem

RS-232C (straight through) modem cable

Modular phone cable with RJ-11 connectors or equivalent

Use the following procedure to install the management station’s modem:

CAUTION

Turn off all equipment prior to making cable connections.

1. Place the modem close enough to the management station to not violate the

50-foot RS-232C distance limitation.

2. Connect the RS-232C cable from the modem’s RS-232C port to the

management station’s serial port. Take care in selecting the appropriate

serial port on the management station (COM1 or COM2, for example).

3. Connect the RJ-11 modular phone cable from the modem

To Line

port to

the telephone jack.

4. Connect power to the modem and turn on the modem power switch (not

required for a PC internal modem).

Figure 3-13: Probe Modem Connection

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 178 179

Keine Kommentare

Agilent Technologies J3916A Bedienungsanleitung Seite 81