Agilent Technologies J3916A Bedienungsanleitung PDF herunterladen (Seite 106)

Bootp Server Configuration

Configuring the Bootptab File

Blank lines and lines beginning with # in the bootptab file are ignored. You

must include a colon and a backslash to continue a line. The ht tag must

precede the ha tag.

An example bootptab file is shown at the end of this procedure.

2. Save the bootptab file after you have entered parameters for all of your

probes.

3. Verify the bootp process by performing one of the items in Table 4-4.

Tag Description

hn send nodename (Boolean flag, no “=value” is needed)

ht hardware type (ether); must precede ha tag

vm vendor magic cookie selector (must comply with RFC 1048)

ha hardware address (link-level or MAC address expressed in

hexadecimal); the probe’s hardware address is printed on a label

located on the Probe’s back panel.

ip Internet Protocol (IP) address for the Probe

sm subnet mask; this is required only if subnetting is being used

gw IP address of the gateway used when sending packets off the local

subnet; one default gateway may be configured

Table 4-3: Bootptab File Tags

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 178 179

Keine Kommentare

Agilent Technologies J3916A Bedienungsanleitung Seite 106