Agilent Technologies InfiniiVision 5000 Series Betriebsanweisung PDF herunterladen (Seite 404)

100

101

15 Reference

404 InfiniiVision Oscilloscopes User’s Guide

Using the 10 MHz reference clock

The 10 MHz REF BNC connector on the rear panel is provided so you can:

• Supply a more accurate sample clock signal to the oscilloscope, or

• Synchronize the timebase of two or more instruments.

Sample clock and frequency counter accuracy

The oscilloscope’s timebase uses a built-in reference that has an accuracy of 15 ppm.

This is sufficient for most uses. However, if you are looking at a window that is very

narrow compared to the selected delay (for example, looking at a 15 ns pulse with the

delay set to 1 ms), significant error can be introduced.

Using the built-in sample clock, the oscilloscope’s hardware frequency counter is a 5-digit

counter.

Supplying an external timebase reference

When you supply an external timebase reference, the hardware frequency counter is

automatically changed to an 8-digit counter. In this case, the frequency counter ([Quick

Meas]

&Select&Counter) is as accurate as the external clock.

For more information on the hardware frequency counter, see “Counter” on page 199.

To supply a sample clock to the oscilloscope

1 Connect a 10 MHz square or sine wave to the BNC connector labeled 10 MHz REF. The

amplitude must be between 180 mV and 1 V, with an offset of between 0 V and 2 V.

2 Press [Utility]&Options&Rear Panel&Ref Signal.

3 Use the Entry Knob and the Ref Signal softkey to select 10 MHz input.

CAUTION

Maximum input voltage at 10 MHz REF connector: Do not apply more than ±15 V at

the 10 MHz REF BNC connector on the rear panel or damage to the instrument may

occur.

1 2 ... 399 400 401 402 403 404 405 406 407 408 409 ... 427 428

Kommentare zu diesen Handbüchern

Keine Kommentare

Agilent Technologies InfiniiVision 5000 Series Betriebsanweisung Seite 404

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Agilent Technologies InfiniiVision 5000 Series