Agilent Technologies E5500 Series Betriebsanweisung PDF herunterladen (Seite 210)

Environmental Control 14

Agilent 5500 SPM User’s Guide 210

atmospheric pressure and is not intended to provide a vacuum or high

pressure environment.

Figure 142 Environmental chamber

The environmental chamber includes eight ports which may be used to

introduce or remove gases from the chamber, or to allow wiring access

for sensors or other electronics. Several types of screw-in fittings are

available from Agilent for wires, liquids or 3 mm (1/8 in) inner diameter

gas tubing. The ports can be used in any combination. For example, one

gas port may be used to introduce a gas while another simultaneously

vents the chamber (i.e., when the gas cannot be safely vented directly

into the lab). One such example would be a non-aqueous

electrochemistry experiment requiring the saturation of an inert as with

an organic solvent.

To use the chamber:

1 Prepare the sample on a sample plate.

2 Mount the sample plate on the microscope.

3 Loosen the retaining screws on the front right and left corners of the

microscope base and swing the top section up on its hinge.

4 Lower the microscope base over the environmental chamber, being

careful to avoid contact with the sample plate. The legs of the

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 231 232

Keine Kommentare

Agilent Technologies E5500 Series Betriebsanweisung Seite 210