Agilent Technologies E1326B Bedienungsanleitung PDF herunterladen (Seite 255)

/*******************************************************/

void set_sample_period(char *base_addr_dmm, int command, unsigned

short parameter)

{

/* this function sets the multimeter sample period */

/* parameter variables */

unsigned short parm1 = 0, parm2 = 0;

/* convert parameter (sample period) to two bytes */

parm1 = parameter >> 8; /* upper byte */

parm2 = parameter & 0xFF; /* lower byte */

/* write command to command register */

/* wait for mm ready bit = 1 */

while(!READY);

iwpoke((unsigned short *)(base_addr_dmm + 0x08),command);

/* write upper byte to parameter register */

/* wait for mm ready bit = 1 */

while (!READY);

iwpoke((unsigned short *)(base_addr_dmm + 0x0A),parm1);

/* write lower byte to parameter register */

/* wait for mm ready bit = 1 */

while (!READY);

iwpoke((unsigned short *)(base_addr_dmm + 0x0A),parm2);

while(!DONE); /* wait until mm is done before sending the */

/* next command and parameters */

if(!NOERR) check_for_error(base_addr_dmm);

/* check for configuration errors */

}

Continued on Next Page

256 HP E1326B/E1411B Multimeter Register-Based Programming Appendix C

1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 290 291

Keine Kommentare

Agilent Technologies E1326B Bedienungsanleitung Seite 255