Agilent Technologies N6705 Spezifikationen PDF herunterladen (Seite 18)

N6731B/ N6732B/ N6733B/ N6734B/ N6735B/ N6736B/

N6741B N6742B N6743B N6744B N6745B N6746B

Programming ranges

Voltage 15 mV – 5 .1 V 15 mV – 8 .16 V 30 mV – 20.4 V 40 mV – 35.7 V 70 mV – 61.2 V 100 mV – 102 V

Current 60 mA – 10.2 A/ 40 mA –6.375 A/ 10 mA – 2.55 A/ 5 mA – 1.53 A/ 2.5 mA – 0.85 A/ 1.5 mA – 0.51 A/

60 mA – 20.4 A 40 mA – 12.75 A 10 mA – 5.1 A 5 mA – 3.06 A 2.5 mA – 1.7 A 1.5 mA – 1.02 A

Programming resolution

NOTE 1

Voltage 3.5 mV 4 mV 7 mV 10 mV 18 mV 28 mV

Current 7 mA 4 mA 3 mA 2 mA 1 mA 0.5 mA

Measurement resolution

NOTE 2

Voltage 3 mV 4 mV 10 mV 18 mV 30 mV 50 mV

Current 10 mA 7 mA 3 mA 2 mA 1 mA 0.5 mA

Programming temperature

coefficient per °C Voltage 0.005% + 0.1 mV 0.005% + 0.1 mV 0.005% + 0.2 mV 0.005% + 0.5 mV 0.005% + 0.5 mV 0.005% + 1 mV

Current 0.005% + 1 mA 0.005% + 0.5 mA 0.005% + 0.1 mA 0.005% + 0.05 mA 0.005% + 0.02 mA 0.005% + 0.02 mA

Measurement temperature

coefficient per °C Voltage 0.01% + 0.1 mV 0.01% + 0.1 mV 0.01% + 0.2 mV 0.01% + 0.2 mV 0.01% + 0.5 mV 0.01% + 0.5 mV

Current 0.01% + 1 mA 0.01% + 0.5 mA 0.01% + 0.1 mA 0.01% + 0.05 mA 0.01% + 0.02 mA 0.01% + 0.02 mA

Output ripple and

noise (PARD) CC rms 8 mA 4 mA 2 mA 2 mA 2 mA 2 mA

Common mode noise

(from 20 Hz – 20 MHz; from

either output to chassis) rms 1 mA 1 mA 1 mA 1 mA 1 mA 1 mA

peak-to-peak < 15 mA < 10 mA < 10 mA < 10 mA < 10 mA < 10 mA

Over-voltage protection

Accuracy 0.25% + 50 mV 0.25% + 50 mV 0.25% + 75 mV 0.25% + 100 mV 0.25% + 200 mV 0.25% + 250 mV

Accuracy w/opt 760 0.25% + 600 mV 0.25% + 600 mV 0.25% + 350 mV 0.25% + 250 mV 0.25% + 300 mV 0.25% + 300 mV

Accuracy w/opt 761 0.25% + 600 mV 0.25% + 600 mV 0.25% + 350 mV 0.25% + 250 mV 0.25% + 300 mV 0.25% + 300 mV

Maximum setting 7.5 V 10 V 22 V 38.5 V 66 V 110 V

Response time 50 µs from occurrence of over-voltage condition to start of output shutdown

Maximum up-programming and down-programming time with full resistive load

(time from 10% to 90% of total voltage excursion)

Voltage setting from 0 V to 20 ms 20 ms 20 ms 20 ms 20 ms 20 ms

full scale and full scale to 0 V

Maximum up-programming and down-programming settling time with full resistive load

(time from start of voltage change until voltage settles

within 0.1% of the full-scale voltage of its final value)

Voltage setting from 0 V to 100 ms 100 ms 100 ms 100 ms 100 ms 100 ms

full scale and full scale to 0 V

Remote sense capability Outputs can maintain specifications with up to a 1-volt drop per load lead.

Series and parallel operation Identically rated outputs can be operated directly in parallel or can be connected for straight series operation.

Auto-series and auto-parallel operation is not available.

Oscilloscope measurement accuracy

(at 23°C ±5°C, Accuracy of any individual point in the trace)

Voltage 0.1% + 25 mV 0.1% + 30 mV 0.1% + 45 mV 0.1% + 75 mV 0.1% + 130 mV 0.1% + 190 mV

Current with current compensation on

NOTE 3

0.15% + 70 mA 0.15% + 40 mA 0.15% + 20 mA 0.15% + 14 mA 0.15% + 12 mA 0.15%

+ 7 mA

Current with current compensation off

NOTE 4

0.15% + 50 mA 0.15% + 30 mA 0.15% + 15 mA 0.15% + 10 mA 0.15% + 9 mA 0.15% + 5 mA

Based on 12-bit DAC, with DAC range adjusted by software calibration

Based on 12-bit ADC (11 bits plus sign), with ADC range adjusted by software calibration

Current compensation on means the selection labeled “Compensate current measurements during voltage transients” is checked on the Meter Properties screen

Current compensation off means the selection labeled “Compensate current measurements during voltage transients” is not checked on the Meter Properties screen

Agilent N6731B – N6736B and N6741B – N6746B Supplemental Characteristics

Supplemental characteristics are not warranted but are descriptions of performance determined either by design or type testing.

All supplemental characteristics are typical unless otherwise noted.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Agilent Technologies N6705 Spezifikationen Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multimeter Agilent Technologies N6705