Agilent Technologies 54657A Betriebsanweisung PDF herunterladen (Seite 42)

•

V2 reads the percentage the V2 marker has moved from the established

100% position. Negative readings indicate marker has moved through the

established V1 marker position.

•

∆V reads the percentage difference between the V1 and V2 marker

repetitive to the established positions. Negative readings indicate markers

have crossed.

Voltage Cursor Measurements in Percent

8 Press the Active Cursor t1 t2 softkey.

9 Toggle the Readout softkey to select time markers in degrees.

If Readout Time is selected, cursor measurements are displayed in seconds

(t1, t2, and ∆t), and Hz (1/∆t). Operation is identical as when the module is

not installed. Refer to the User and Service Guide for your oscillosocpe for

more information.

Toggle the Active Cursor t1 t2 softkey until the desired marker(s) (t1, t2,

or both) are selected, and rotate the knob closest to the

Cursors key to set the marker(s) to the desired position.

When both t1/t2 markers are selected, rotating the knob closest to the

Cursors key moves both markers.

Figure 2– 10

Operating the Measurement/Storage Module

To make additional cursor measurements

2–26

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 88 89

Keine Kommentare

Agilent Technologies 54657A Betriebsanweisung Seite 42