Agilent Technologies EXG Betriebsanweisung PDF herunterladen (Seite 129)

Care and Cleaning

7-4 Maintaining the Cardiograph

To clean the printhead:

CAUTION Touch the equipotential connector on the back of the cardiograph to discharge

any static electricity stored on your skin before touching the printhead. The

printhead can be damaged by static electricity.

1. From the front of the cardiograph, unlatch and open the paper door. The

printhead is to the right under the paper blade and behind a brush. See

Figure .

2. Wipe the printhead with a foam swab dipped in 90% isopropyl alcohol.

Scrub until all visible residues are removed.

3. Dry the printhead with a clean lint-free tissue.

To clean the paper sensor lens:

1. From the front of the cardiograph, unlatch and open the paper door. The

paper sensor lens is to the right under the printhead. See Figure .

2. Lightly wipe the paper dust off of the paper sensor lens with a dry foam

swab. Do not use alcohol.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 194 195

Keine Kommentare

Agilent Technologies EXG Betriebsanweisung Seite 129