Agilent Technologies E6474A Betriebsanweisung Seite 107

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 224
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 106
Use Your System 4
Agilent E6474A User’s Guide 107
receiver requires a 30-minute warm-up period to meet the
guaranteed specifications.
2 Depending on your system type, set the frequency/power
levels using “Signal Generator Uplink Settings" on page 108.
3 Verify that the correct values are set on the signal generator.
NOTE
There is a three-minute delay after power-up or re-configuration, before
the internal temperature sensor is activated and measurements are
nominally correct.
Figure 45 System measurement verification setup using a signal generator
NOTE
Do not connect the signal generator at this stage.
Seitenansicht 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 223 224

Kommentare zu diesen Handbüchern

Keine Kommentare