Agilent Technologies 8922S Bedienungsanleitung PDF herunterladen (Seite 12)

Supplemental characteristics

3 dB bandwidth: 2 Hz to 100 kHz

Input impedance: 1 MΩ, 145 pF at audio in

Minimum resolution: 4 digits for inputs ≥100 mV 3 digits

for inputs <100 mV

DC Voltage Measurement

Voltage range: 100 mV to 42 V

Accuracy: ±(1.0% of reading + DC offset)

DC offset: ±45 mV

Supplemental characteristics

Minimum resolution: 1.0 mV

Distortion Measurement

Fundamental frequency: 1 kHz ±5 Hz

Input level range: 30 mVrms to 30 Vrms

Display range: 0.1% to 100%

Accuracy: ±1 dB (0.5 to 100% distortion)

Residual THD + noise (15 kHz BW): The greater of -60 dB

or +175 µV

Supplemental characteristics

Minimum resolution: 0.01% distortion

Audio Filters

There are seven audio filters used in the 8922 test set:

50 Hz HPF, 300 Hz HPF, 300 Hz LPF, 3 kHz LPF, 15 kHz

LPF, 750 µs de-emphasis, and 1 kHz notch.

Audio Detectors

The audio detectors available in the 8922 are:

Pk+, pk-, pk + hold, pk - hold, pk±/2, pk ±/2 hold,

pk±max, pk±max hold, and RMS.

Oscilloscope Specifications

Frequency range (3 dB): 2 Hz to 50 kHz

Scale/division: 10 mV to 10 V in 1, 2, 5, and 10 steps

Amplitude accuracy (20 Hz to 10 kHz): ±1.5% of reading

0.1 division

Time/division: 10 µs to 100 ms in 1, 2, 5 and 10 steps

External trigger level: TTL

Maximum voltage scope in: 5 V

peak

Audio in: 30 V

rms

Supplemental characteristics

3 dB bandwidth: Typically >100 kHz

Internal DC offset: ≤0.1 division for ≤50 µV/div sensitivity

Remote Programming

GPIB: Agilent’s implementation of IEEE Standard 488.2

Functions implemented: SH1, AH1, T6, L4, SR1, RL1, LE0,

TE0, PP0, DC1, DT1, C4, C11, E2

RS-232: 3 wire RJ-11 connector used for serial data

transfer

Baud rates: 150, 300, 600, 1200, 2400, 4800, 9600, and

19200 selectable

Printer Support

RS-232: 3-wire RJ-11 connector used for serial data

transfer

Parallel Port

This port is used with printers requiring a parallel interface

when printing. Use address 15 when sending data to this

port from IBASIC Programs.

Pin assignments are as follows:

1 nStrobe

2 Data 1 (Least significant bit)

3 Data 2

4 Data 3

5 Data 4

6 Data 5

7 Data 6

8 Data 7

9 Data 1 (Most significant bit)

10 nAck

11 Busy

12 PError

13 Select

14 nAutoFd

15 nFault

16 nInit

17 nSelectIn

18 Signal Ground (nStrobe)

19 Signal Ground (Data 1 and Data 2)

20 Signal Ground (Data 3 and Data 4)

21 Signal Ground (Data 5 and Data 6)

22 Signal Ground (Data 7 and Data 8)

23 Signa Ground (Busy and nFault)

24 Signal Ground (PError, Select and nAck)

25 Signal Ground (nAutoFd, nSelectIn and nInit)

Audio Analyzer and Oscilloscope, Remote Programming,

and Printer Support Specifications

1 2 ... 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Agilent Technologies 8922S Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Agilent Technologies 8922S