Agilent Technologies 1100 Series Technical Information PDF herunterladen (Seite 21)

Specifying the TCP/IP Settings and the BCD Board Location

Specifying the TCP/IP Settings

Thermo Scientific Agilent 1100 Series Connecting the Hardware and Triggering Data Acquisition 13

• In the Stack IP Address box, type the IP address for your Agilent 1100 LC stack.

Leave the value set to the default or contact your network administrator for the IP

address.

The default stack IP address is 172.16.0.102.

• In the Sub-mask box, type the subnet mask (address mask). Leave the subnet mask set

to its default value, or contact your network administrator for the subnet mask.

The default subnet mask value is 255.255.255.0.

• In the Bootp Server box, type the IP address for the network card in your PC that is

responsible for assigning the stack IP address for your Agilent 1100 LC system. Leave

the value set to the default or contact your network administrator for the BOOTP

server IP address.

The default IP address for the network card is 172.16.0.101.

3. Click OK to save the settings and close the dialog box.

4. Click Done to close the Xcalibur Instrument Configuration window.

5. Open the Xcalibur data system before you turn on the devices of your Agilent1100 Series

LC stack.

Note The TCP/IP settings are shared by all Agilent 100 LC modules in the stack.

Changing the value of a setting for one module in the Instrument Configuration

dialog box changes the value of that setting for all modules in the stack.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 29 30

Keine Kommentare

Agilent Technologies 1100 Series Technical Information Seite 21