Agilent Technologies 1100 Series Technical Information PDF herunterladen (Seite 11)

Thermo Scientific Agilent 1100 Series Connecting the Hardware and Triggering Data Acquisition 3

Connecting the Hardware

This chapter describes how to install the interface boards, connect the Ethernet cables, and

make the contact closure connections required to control an LC/MS system (Agilent

LC/Thermo scientific MS) system from Xcalibur.

Ethernet Communication Kit

To connect an Agilent 1100 series HPLC to your Thermo Scientific MS detector, you must

have the Ethernet Communication kit (P/N OPTON-30012), which contains the parts listed

in Table 2. In addition, one of the modules of the Agilent 1100 Series LC must have a

JetDirect 400N LAN card (P/N 00825-01140) or an Agilent LAN interface board, model

number G1369A.

Contents

• Ethernet Communication Kit

• Installing a Network Card in an Agilent Module

• Connecting the Ethernet Communication Cables

• Installing the External Contact Interface Board

• Connecting the Trigger Cable

Table 2. Ethernet Communication kit (P/N OPTON 30012)

Description Part Number

Ethernet switch 00825-01-00024

PCB, Agilent BCD board 00012-27714

Cable, trigger external contact, 2-wire DB15 00012-27716

Cable, patch, 3 m (10 ft) CAT5 RJ45, straight shield 00012-70008

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Keine Kommentare

Agilent Technologies 1100 Series Technical Information Seite 11