Agilent Technologies N1022A Bedienungsanleitung PDF herunterladen (Seite 3)

The N1022A is directly compatible with the following

modules:

86101A 86102A and U

86103A and B 86105A

86106A 86112A

83481A 83483A

83485A 83486A

83487A 54751A

54753A 54754A

The following plug-in modules have 2.4 mm compatible

connectors. The 85130-60010 2.4 mm (f) to 3.5 mm

bulkhead adapter is required in addition to the N1022A:

86106A 86106B

86109A 86109B

86116A 86116B

86117A 86118A

83484A

(For non-oscilloscope applications, a type ‘N’ (m) to

3.5 mm bulkhead adapter (N1022-60014) is available.

There is also a 3.5 mm (f) to 3.5 mm bulkhead adapter

(85052-60034)).

The following plug-in modules do not have built-in probe

power supplies. The Agilent 1143 power supply is used

to provide probe power through the N1022A. (In this

configuration an automatic gain and offset calibration is

not available. A manual gain calibration can be performed

to account for probe attenuation and signal splitting).

The 01143-61602 probe power extension cable may be

useful to allow the 1143 power supply to be located over

1 meter away from the oscilloscope or other instrument.

86105B

86105C

86116B

86117A

86118A

The 86100 oscilloscope mainframe has built-in calibration

routines (except as noted above) to compensate for probe

attenuation and offset to allow a direct display of the

actual signal levels found at the probe tip. Very high

frequency and small pitch probes such as the N5381A

12 GHz solder-in probe head are difficult to connect to

the 86100 BNC calibration connector. The E2655B Deskew

and Performance Verification fixture is recommended.

Figure 3: The E2655B Deskew and Performance Verification fixture

allows for easy probe calibration with the 86100 DCA

1 2 3 4 5 6 7

Kommentare zu diesen Handbüchern

Keine Kommentare

Agilent Technologies N1022A Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multimeter Agilent Technologies N1022A