Agilent Technologies ENA Series Bedienerhandbuch PDF herunterladen (Seite 19)

Chapter 1 19

General Information

Required Equipment

1. General Information

Cable BNC(m)-BNC(m) Cable, 30 cm

BNC(m)-BNC(m) Cable, 122 cm

Coaxial cable with Type-N (m)

connectors, 61 cm (24 in), 2 ea.

Coaxial cable with 75  Type-N (m)

connectors, 61 cm (24 in), 2ea

Agilent p/n 8120-1838

Agilent p/n 8120-1840

Agilent N6314A (p/n

8120-8862)

Agilent p/n 8120-8898

P,A

P,A ,T

Adapter N(m)-N(m) 50  Adapter

N(m)-N(m) 75  Adapter

N(m) 50  - N(f) 75  Adapter

N(m)-BNC(f) Adapter

BNC(m)-BNC(m)

BNC Tee (m) (f) (f)

Agilent p/n 1250-0778

Agilent p/n 1250-1528

Agilent p/n 1250-0597

Agilent p/n 1250-0780

Agilent p/n 1250-0216

Agilent p/n 1250-0781

A,T

P,A

Torque Wrench Size: 3/4 inch

Torque: 136 N-cm

Agilent p/n 8710-1766 1 P,A

USB/GPIB Interface No Substitute Agilent 82357A 1 P,A

Personal Computer

with GPIB board

Windows 2000 / XP, VEE 6.2 or

VEE 7.xx

1P,A

*1.P: Performance Tests, A: Adjustment, T: Troubleshooting

*2.Opt.050 and Opt.124 can be substituted for Opt.030. In this case, a N(m)-BNC(f) adapter is necessary.

*3.The accuracy of a standard E4419B of 0.02 dB is adequate for all tests/adjustments except “Dynamic Accuracy

Test”. This test requires a power meter with Option G12 or H12 that has been certified to a higher accuracy speci-

fication. If an Option G12 or H12 power meter is not available, a test is provide on “Power Meter Accuracy Test”

on page 20 to verify the accuracy of a standard power meter.

Table 1-2 Alternative Test Equipment

Equipment Critical specifications Model Qty.

Use

Frequency Counter Frequency: 50 MHz to 3 GHz

Accuracy: < 2.5 ppm

Agilent 53132A/181A with

Opt.010 and 030

1P,A

Power Meter No Substitute

Agilent E4419B

1P,A

Calibration Kit No Substitute Agilent 85032F 1 T

Short Type-N(m) Agilent 11512A 2 P,T

*1.P: Performance Tests, A: Adjustment, T: Troubleshooting

*2.Opt.050 and Opt.124 can be substituted for Opt.030. In this case, a N(m)-BNC(f) adapter is necessary.

*3.If an accurate measurement of the dynamic accuracy specification is not required, a standard E4419B can be used.

Table 1-1 Recommended Test Equipment

Equipment Critical specifications Recommended Model Qty.

Use

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 250 251

Kommentare zu diesen Handbüchern

Keine Kommentare

Agilent Technologies ENA Series Bedienerhandbuch Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multimeter Agilent Technologies ENA Series