Agilent Technologies U1401B Bedienungsanleitung PDF herunterladen (Seite 7)

U1401B Quick Start Guide

Performing Temperature Measurements

WARNING

• Before measuring the temperature of a circuit or device,

disconnect its power.

• The bead type thermocouple probe is suitable for

measuring temperature from –40 °C to 204 °C in Teflon

compatible environments. The probes may emit toxic

gas above this temperature range.

1 Set the slide switch to the M position to

disable the output.

2 Set the rotary switch to mV.

3 Press and hold for more than 1

second.

4 Plug the thermocouple probe (with

adapter) into the INPUT terminals.

5 Touch the surface to be measured with the

thermocouple probe and read the display.

Best practices:

• Do not bend the thermocouple leads at

sharp angles. Repeated bending may break

the leads.

• Do not immerse the thermocouple probe in

any liquid.

• Clean the surface to be measured and

make sure that the probe is securely

touching the surface.

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Agilent Technologies U1401B Bedienungsanleitung Seite 7