Agilent Technologies N2783B Bedienungsanleitung PDF herunterladen (Seite 40)

40

Probing Accessories - N2744A T2A Probe Interface Adapter

• Enables Tektronix TekProbe-BNC

level 2 probes to connect to

Agilent’s AutoProbe interface on

InfiniiVision 3000X, 5000, 6000,

7000, and Infiniium 9000, 90000

oscilloscopes

• An easy-to-use plug-on adapter

to the Agilent oscilloscope’s

AutoProbe interface

• Provides necessary probe power,

calibration, and offset control as

needed to the attached TekProbe

probe

The N2744A T2A interface adapter

enables selected TekProbe

®

interface

level 2 probes to be used with Agilent

oscilloscopes with AutoProbe interface.

Existing TekProbe-BNC probe types can

simply be plugged into the T2A adapter,

which is then plugged directly into any

AutoProbe input channel on an InfiniiVision

or Infiniium oscilloscope. Select the probe

model in the scope menu and the Agilent

oscilloscope sets up the attenuation factor

and the probe type automatically. The T2A

interface adapter supplies the necessary

probe power, calibration (for selected

models only), and offset control as used

by the connected TekProbe probe. The

adapter is targeted for customers using

both Tek active probes with TekProbe-BNC

level 2 interfaces and Agilent oscilloscopes

with the AutoProbe interface.

Tek probe compatibility

The N2744A T2A adapter supports only

the probes listed below with TekProbe

interfaces.

AC/DC Current Probe

TCP202 50-MHz AC/DC current probe

Single-ended Active Probes

P6243 Single-ended active probe,

1 GHz, 10:1 without offset

control

P6245 Single-ended active probe,

1.5 GHz, 10:1 with offset

control

P6205 Single-ended active probe,

750 MHz, 10:1 without offset

control

P6241 Single-ended active probe,

4 GHz, 10:1 with offset

control

P6249 Single-ended active probe,

4 GHz, 5:1 with offset control

Differential Active Probes

P5205 Differential probe, 100 MHz,

50:1/500:1 with offset control

P5210 Differential probe, 50 MHz,

100:1/1000:1 with offset

control

P6246 400 MHz, 10:1/1:1 with offset

control

P6247 1 GHz, 10:1/1:1 with offset

control

P6248 1.5 GHz, 10:1/1:1 with offset

control

P6250 500 MHz, 50:1/5:1 with offset

control

P6251 1 GHz, 50:1/5:1 with offset

control

Agilent scope compatibility

• Agilent InfiniiVision 3000 X-Series with

software version 1.10 or higher

• Agilent InfiniiVision 5000, 6000, and

7000 Series and future revisions

(except 6000 100-MHz) with software

version 06.16 or higher

• Agilent Infiniium 9000 and 90000 ,

90000X (with N5442A) Series with

software version 03.11 or higher

Ordering information

N2744A T2A probe interface adapter

Optical-to-Electrical Converters

(works with InfiniiVision 5000, 6000

and 7000 with version 6.16 software

only)

P6701B 1 GHz Optical-to-electrical

converter with FC/PC connector

P6703B 1.2 GHz Optical-to-electrical

converter with FC/PC connector

P6711 250 MHz Optical-to-electrical

converter

P6713 300 MHz Optical-to-electrical

converter

1 2 ... 35 36 37 38 39 40 41 42 43 44 45

Kommentare zu diesen Handbüchern

Keine Kommentare