Agilent Technologies Cell Phone S GSM Bedienungsanleitung PDF herunterladen (Seite 170)

100

101

4-64

Screens

Measurement Sync

This screen deﬁnes settings that determine how synchronization will occur for any

of the following measurements:

• Pwr Ramp and Pulse

• Output RF Spectrum

• Pulse On/Off Ratio

1. ARFCN If Auto is chosen in the Hopped TCH ARFCN Cntl ﬁeld, the measured ARFCN will

be displayed, as soon as a measurement is completed on a Hopped TCH. This will

be the lowest frequency ARFCN in the hop sequence.

If Speciﬁc is chosen from the Hopped TCH ARFCN Cntl ﬁeld, enter a speciﬁc

ARFCN from the hop sequence. After Meas Arm is selected, the Agilent 8922M/S

will make a measurement when the mobile is transmitting on the selected frequency.

2. Burst Length This ﬁeld displays the burst length of the Burst Type selected. If Burst Type is set to

User Deﬁned, the Burst Length will be 87 or 147.

3. Burst Number This ﬁeld selects which burst deﬁnition is being displayed.

Range 0 to 3.

14 12

97161118

13,17

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 380 381

Kommentare zu diesen Handbüchern

Keine Kommentare

Agilent Technologies Cell Phone S GSM Bedienungsanleitung Seite 170

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Agilent Technologies Cell Phone S GSM