Agilent Technologies Cell Phone S GSM Bedienungsanleitung PDF herunterladen (Seite 141)

100

101

4-35

Screens

Cell Control - CW Generator

This screens allows you to set the Agilent 8922M/S up as a CW Signal Generator.

1. Base Station There are two Base Station ﬁelds. The Amplitude ﬁeld sets the amplitude of the

Agilent 8922M/S transmission. The Channel ﬁeld selects which channel the

Agilent 8922M/S transmits the Broadcast Control Channel (BCCH) information. If

this is changed during a call, the call will be deactivated. The frequency can also be

set explicitly between 10 MHz and 1000 MHz.

2. Burst Type. This ﬁeld deﬁnes the expected burst type of the mobile phone’s transmitted bursts.

When the Trafﬁc Channel (TCH) is selected, the correct Colour Code should be

chosen.

3. Channel This ﬁeld displays the channel number the Agilent 8922M/S is taking measurements

from. For a GSM900 mobile phone the channel number may vary from 1 through

124. For an E-GSM mobile phone the channel number may vary from 0 through 124

and 975 through 1023. If you change the channel number, the frequency ﬁeld value

also changes. The converse of this is not the case. You may enter a non GSM

standard channel frequency on another screen, between 10 MHz and 1000 MHz.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 380 381

Kommentare zu diesen Handbüchern

Keine Kommentare

Agilent Technologies Cell Phone S GSM Bedienungsanleitung Seite 141

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Agilent Technologies Cell Phone S GSM