Agilent Technologies X/P/K281C Bedienungsanleitung PDF herunterladen (Seite 27)

Service Information 4

Agilent X/P/K281C Adapters Operating and Service Manual 27

Replaceable Parts

Replaceable parts for the P281C adapter are shown below.

Refer to Table 4- 1, Table 4- 2, and Table 4- 3 for

identification of parts and corresponding part numbers for

all models. For ordering information, contact the nearest

Agilent office listed in “Contacting Agilent” in the front

matter of this manual.

Figure 4-1 Replaceable Parts

NOTE

Ta b l e 1 - 1 on page 8 gives dimensional tolerances for Option 006 that can

be expected to yield satisfactory results. It may be necessary to try various

combinations of spacers and shims to obtain proper dimensions. The use

of at least one shim is recommended because of electro-chemical

differences between the connector body and the adapter body. Refer to the

appropriate table of replaceable parts for the thickness of shims and

spacers.

CAUTION

Take care to avoid damaging parts. Burring, scratching, denting, or

deforming parts may impair operating characteristics.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Keine Kommentare

Agilent Technologies X/P/K281C Bedienungsanleitung Seite 27