Agilent Technologies N3970A Wartungshandbuch PDF herunterladen (Seite 33)

Which Cleaning Procedure should I use ? 5

Cleaning Procedures 33

Procedure D

How to clean bare fiber adapters

Bare fiber adapters are difficult to clean. Pro-

tect from dust unless they are in use.

Preferred Procedure

Use the following procedure on most occasions.

1 Blow away any dust or dirt with compressed air.

Procedure for Stubborn Dirt

Use this procedure when there is greasy dirt on the adapter.

1 Clean the adapter by pushing and pulling a new, dry pipe

cleaner into the opening. Rotate the pipe cleanerslowly as

you do this.

2 Clean the adapter by rubbing a new, dry cotton swab over

the surface using a small circular movement.

3 Blow away any remaining lint with compressed air.

CAUTIONCAUTION

Never use any kind of solvent when cleaning a bare fiber

adapter as solvents can:

• damage the foam inside some adapters;

• deposit dissolved dirt in the groove, which can then contam-

inate the surface of an inserted fiber.

CAUTIONCAUTION

Be careful when using pipe cleaners, as the core and the bris-

tles of the pipe cleaner are hard and can damage the adapter.

cleaning.book Page 33 Wednesday, May 22, 2002 5:16 PM

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 49 50

Keine Kommentare

Agilent Technologies N3970A Wartungshandbuch Seite 33