Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Installationsanleitung PDF herunterladen (Seite 120)

120 16900 Series Logic Analysis Systems Installation Guide

6 Using and Updating the Logic Analysis System

3 For the interface card location you will be using, using a Torx T10

screwdriver, remove the screw securing the slot cover; then, remove the

slot cover.

4 Insert the interface card into the appropriate slot:

a Ensure that the tab on the board’s rear panel is aligned with the slot

in the deck.

b Press the board securely into the socket on the motherboard.

c Replace the screw.

5 Replace the cover.

T-10 screws (2)

PCI cable

Display cable

Ta b

Slots in deck

CAUTION

When reinstalling the handle assembly, ensure that the screws are torqued to 2.372

Newton meters (21 inch pounds) so that they do not work themselves loose.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 137 138

Keine Kommentare

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Installationsanleitung Seite 120