Agilent Technologies 83640A Bedienungsanleitung PDF herunterladen (Seite 12)

Installation Note 83650-90007 11

35. Refer to Figure 11. Remove the four hole plugs from the rear panel.

36. Attach the BNC and printed circuit assembly to the rear panel with the five screws provided.

Use 08360-60061 for Optin 004 and 08360-60186 for Option 002/004 combination.)

37. Slide the pulse input BNC connector into the rear panel.

38. Place the washer over the BNC connector and attach with the BNC nut.

Figure 11. Option 004 BNC Connector Removal

39. Slide the rear panel back into the casting.

40. Replace the four screws on the bottom back edge and the four screws on the top back edge.

41. Disconnect W51 from the low pass filter FL2 and attenuator AT3 on the RF deck (Figure 12).

1 2 ... 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Agilent Technologies 83640A Bedienungsanleitung Seite 12