Agilent Technologies 1000A Bedienungsanleitung Seite 12

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 14
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 11
Performance characteristics
12
I/O
Standard ports USB 2.0-compliant host port on front panel (A and B models) and rear panel (A models only) compatible
with USB flash drives.
USB 2.0 device port for PictBridge compatible printing (A and B models) and USBTMC remote PC control
(A models only)
Max transfer rate USB 2.0 full-speed up to 12 Mb/sec
USB flash drive compatibility Most FAT formatted <2 GB or FAT32 formatted <32 GB flash drives
Printer compatibility PictBridge-compliant printers via USB device port
General characteristics
Physical size 12.78 inches W x 6.21 inches H x 5.08 inches D (32.46 cm W x 15.78 cm H x 12.92 cm D) (A models)
11.9 inches W x 6.06 inches H x 5.23 inches D (30.3 cm W X 15.4 cm H X 13.3 cm D) (B models)
Weight Net: 3.03 kgs (6.68 lbs) Shipping: 4.87 kgs (10.74 lbs) (A models)
Net: 2.4 kgs (5.3lbs) Shipping: 3.87 kgs (8.3lbs) (B models)
Probe comp output Frequency ~1 kHz; Amplitude ~3 V
Scope lock Secure with a Kensington lock or looped cable through notch built into chassis
Power requirements
Line range 100-240 VAC, 50/60 Hz ± 10%
Power usage ~60 W max (A models)
~50 W max (B models)
Environmental characteristics (A models)
Ambient temperature Operating 0°C to +40°C; non-operating -20°C to +60°C
Humidity Operating 90% RH at 40°C for 24 hr; non-operating 60% RH at 60°C for 24 hr
Altitude Operating to 4,400 m (15,000 ft); non-operating to 15,000 m (49,213 ft)
Vibration Agilent class GP and MIL-PRF-28800F; class 3 random
Shock Agilent class GP and MIL-PRF-28800F
Pollution degree
2
Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation must be expected
Indoor use Rated for indoor use only
Environmental characteristics (B models)
Ambient temperature Operating 10°C to +40°C; non-operating -20°C to +60°C
Cooling Method Fan force air flow
Humidity Operating; +35°C or below ≤90 % relative humidity ; non-operating +40°C ≤60 % relative humidity
Altitude Operating Operating to 3,000 m (9.842 ft); non-operating to 15,000 m (49,213 ft)
Vibration Agilent class GP and M-PRF-28800F; class 3 random
Shock Agilent class GP and M-PRF-28800F;
Pollution degree
2
Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation must be expected
Regulatory Safety - UL61010-1:2003, CSA22.2 No. 61010-1:2003, EN61010-1:2001, IEC61010-1:2001.
EMI – Passes IEC 61236 -1:2004 / EN 61326-1:2006 Meets EU EMC Directive 2004/108/EC requirements
Indoor use Rated for indoor use only
Seitenansicht 11
1 2 ... 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare