Agilent Technologies 86100C Bedienungsanleitung PDF herunterladen (Seite 10)

Temperature

Operating 10 °C to +40 °C (50 °F to +104 °F)

Non-operating –40 °C to +65 °C (–40 °F to +158 °F)

Humidity

Operating Up to 90% humidity (non-condensing) at +40 °C (+104 °F)

Non-operating Up to 95% relative humidity at +65 °C (+149 °F)

Altitude

Operating Up to 4,600 meters (15,000 ft)

Non-operating Up to 15,300 meters (50,000 ft)

Vibration

Operating Random vibration 5 to 500 Hz, 10 minutes per axis, 0.21 g (rms)

Non-operating Random vibration 5 to 500 Hz, 10 minutes per axis, 0.3 g (rms); Resonant search, 5 to 500 Hz

swept sine, 1 octave/min sweep rate, 0.5 g, 5 minute resonant dwell at 4 resonances/axis

Power requirements

Voltage 90 to 132 or 198 to 264 Vac, 48 to 66 Hz

Power (including modules) 604 VA; 391 W

Weight

Mainframe without modules 15.5 kg (34 lb)

Typical module 1.2 kg (2.6 lb)

Mainframe dimensions (excluding handle)

Without front connectors and rear feet 215.1 mm H x 425.5 mm W x 566 mm D (8.47 in x 16.75 in x 22.2 in)

With front connectors and rear feet 215.1 mm H x 425.5 mm W x 629 mm D (8.47 in x 16.75 in x 24.8 in)

Specifications

Mainframe specifications

HORIZONTAL SYSTEM (time base) PATTERN LOCK

Scale factor (full scale is ten divisions)

Minimum 2 ps/div (with 86107A: 500 fs/div)

Maximum 1 s/div 250 ns/div

Delay

Minimum 24 ns 40.1 ns

Maximum 1000 screen diameters or 10 s, 1000 screen diameters or 25.401 µs,

whichever is smaller whichever is smaller

Time interval accuracy

1 ps + 1.0% of ∆ time reading

8 ps + 0.1% of ∆ time reading

Time interval accuracy – jitter mode operation

1 ps

Time interval accuracy – with 86107A < 200 fs

precision timebase

Time interval resolution ≤ (screen diameter)/(record length) or 62.5 fs,

whichever is larger

Display units Bits or time (TDR mode–meters)

VERTICAL SYSTEM (channels)

Number of channels 4 (simultaneous acquisition)

Vertical resolution 14 bit A/D converter (up to 15 bits with averaging)

Full resolution channel scales Adjusts in a 1-2-5-10 sequence for coarse adjustment or fine adjustment resolution

from the front panel knob

Adjustments Scale, offset, activate filter, sampler bandwidth, attenuation factor, transducer conversion factors

Record length 16 to 4096 samples – increments of 1

Specifications describe warranted performance over the temperature range of +10 °C to +40 °C (unless otherwise noted). The specifications are

applicable for the temperature after the instrument is turned on for one (1) hour, and while self-calibration is valid. Many performance parameters are

enhanced through frequent, simple user calibrations. Characteristics provide useful, non-warranted information about the functions and

performance of the instrument. Characteristics are printed in italic typeface.

Factory Calibration Cycle -For optimum performance, the instrument should have a complete verification of specifications once every twelve (12) months.

General specifications

This instrument meets Agilent Technologies’ environmental specifications (section 750) for class B-1 products with exception as described for temperature and

condensation. Contact your local field engineer for complete details. Product specifications and descriptions in this document subject to change without notice.

Time offset relative to the front panel trigger input on the instrument mainframe.

Dual marker measurement performed at a temperature within ±5 °C of horizontal calibration temperature.

Delay settings: ∆ time is in the range (26 + N*4 ns) ±1.9 ns, where N = 0, 1, 2, ... 17.

Characteristic performance. Test configuration: PRBS of length 2

– 1 bits, Data and Clock 10 Gb/s.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Agilent Technologies 86100C Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Agilent Technologies 86100C