Agilent Technologies Weather Radio 1680 Bedienungsanleitung PDF herunterladen (Seite 119)

119

Chapter 6: Replacing Assemblies

1680A,AD-series disassembly/assembly

To remove the CD-ROM drive assembly

1 Do the procedure "To remove the chassis from the sleeve".

2 Disconnect the IEEE 1394 cable from the PCI IEEE 1394 interface board.

Disengage the cable from the cable clamps on the top of the CD-ROM drive

assembly.

3 Remove the data cable, power cable and audio cable from the CD-ROM

drive interface board.

4 Using a Torx T-10 screwdriver, remove five screws that secure the CD-

ROM drive assembly to the chassis.

5 Slide the CD-ROM assembly out of the chassis.

Remove the CD-ROM from the assembly

1 1 Using a Torx T-10 screwdriver, remove two screws that secure the CD-

ROM interface board to the CD-ROM drive brackets.

2 Remove the interface board from the CD-ROM drive brackets.

A connector on the back of the CD-ROM interface board will disengage from an

interface connector on the rear of the CD-ROM drive.

3 Using a Torx T-10 screwdriver, remove two screws, one on each side of the

CD-ROM drive brackets, that secure the top bracket to the bottom

bracket. Separate the two brackets.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 173 174

Keine Kommentare

Agilent Technologies Weather Radio 1680 Bedienungsanleitung Seite 119